PRODUCT&CASE
| 材質 / Material quality | 45#.ST52.25Mn.20#.20MnV6.42CrMo4.40Cr |
| 尺寸 / Size | φ20-φ500mm |
| 長度 / Length | L200-20000mm |
| 外徑公差 / Outer diameter tolerance | f7-f8（其他可定制 / Other customizable options） |
| 鉻層厚度 / Chromium plating thicknes | 0.02mm-0.50mm |
| 表面粗糙度 / Surface roughness | ≤0.05μm |
| 直線度 / Straightness | ≤0.1mm/m |
| 調質處理 / Quenching and tempering hardness | HB220-360 |
| 高頻淬火 / High-frequency quenching | HRC50-60 |
| 表面硬度 / Surface hardness | 800-1150HV |
| 表面處理 / Surface treatment |
鍍鉻、中高頻感應淬火、調質、調質+中高頻感應淬火 Chromium plating, medium and high frequency induction hardening, quenching and tempering, quenching and tempering+medium and high frequency induction hardening |
| 鹽霧試驗 / Salt spray test | 9級 150-300小時 / Level 9 150-300 hours |
| 可焊接性 / Weldability | 好 / good |
| 包裝 / Packing |
防銹油處理后每根套入防水紙管/木箱 After rust prevention oil treatment, each piece is wrapped in a waterproof paper tube / wooden box |
| 質量證明 / Quality certificate |
提供產品質量報告、鍍鉻厚度報告、鹽霧測試報告等 Provide product quality reports, chromium plating thickness reports, salt spray test reports, etc |
| 特殊要求 / Special requirements |
根據客戶要求定制產品 Customizing products according to customer requirements |
| 材質 / Material quality | C | Si | Mn | P | S | Cr | Ni | Cu | V |
| 45# | 0.42-0.50 | 0.17-0.37 | 0.50-0.80 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.30 | ≤0.25 | / |
| ST52 | ≤0.20 | ≤0.50 | ≤1.70 | ≤0.035 | ≤0.035 | ≤0.30 | ≤0.50 | ≤0.30 | ≤0.15 |
| 25Mn | 0.22-0.29 | 0.17-0.37 | 0.70-1.0 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.30 | ≤0.25 | / |
| 20# | 0.17-0.23 | 0.17-0.37 | 0.35-0.65 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.30 | ≤0.25 | / |
| 20MnV6 | 0.16-0.22 | 0.10-0.50 | 1.30-1.70 | ≤0.035 | ≤0.035 | ≤0.30 | ≤0.30 | ≤0.30 | 0.10-0.20 |
| 42CrMo4 | 0.38-0.45 | 0.15-0.40 | 0.60-0.90 | ≤0.30 | ≤0.035 | 0.9-1.20 | / | / | / |
| 40Cr | 0.37-0.45 | 0.17-0.37 | 0.50-0.80 | ≤0.035 | ≤0.035 | 0.8-1.10 | ≤0.30 | ≤0.30 | / |
|
材質 Material quality |
抗拉強度 / Tensilestrength N/mm² （MPa） |
屈服強度 / Yield strength N/mm² （MPa） |
伸長率 / Elongation E% |
沖擊功 / Impactenergy J |
| 45#冷拔 / 45 # Cold drawn | ≥630 | ≥540 | ≥15 | ≥41 |
| 45#調質 / 45 # Quenching and tempering | ≥800 | ≥630 | ≥20 | ≥41 |
| Q345D冷拔 / Q345D cold drawn | ≥620 | ≥520 | ≥15 | ≥27（-20℃） |
| 25Mn冷拔 / 25Mn cold drawn | ≥620 | ≥520 | ≥15 | / |
| 20#冷拔 / 20 # cold drawn | ≥520 | ≥400 | ≥15 | / |
| 20MnV6 | ≥750 | ≥590 | ≥12 | ≥40 |
| 42CrMo4 | ≥980 | ≥850 | ≥14 | ≥47 |
| 40Cr | ≥1000 | ≥800 | ≥10 | / |
|
規格 Specifications |
每米重 Weight per meter |
鍍鉻面積 Chromium plating area |
公差f7 Tolerance f7 |
公差f8 Tolerance f8 |
公差f9 Tolerance f9 |
備注 Remarks |
| Ф20 | 2.5 | 6.28 | 0.02-0.041 | 0.02-0.053 | 0.02-0.072 | 負公差 |
| Ф22 | 3 | 6.9 | 0.02-0.041 | 0.02-0.053 | 0.02-0.072 | 負公差 |
| Ф25 | 3.9 | 7.85 | 0.02-0.041 | 0.02-0.053 | 0.02-0.072 | 負公差 |
| Ф28 | 4.8 | 8.8 | 0.02-0.041 | 0.02-0.053 | 0.02-0.072 | 負公差 |
| Ф30 | 5.6 | 9.4 | 0.02-0.041 | 0.02-0.053 | 0.02-0.072 | 負公差 |
| Ф32 | 6.3 | 10 | 0.025-0.05 | 0.02-0.064 | 0.02-0.087 | 負公差 |
| Ф35 | 7.6 | 11 | 0.025-0.05 | 0.02-0.064 | 0.02-0.087 | 負公差 |
| Ф36 | 8 | 11.3 | 0.025-0.05 | 0.02-0.064 | 0.02-0.087 | 負公差 |
| Ф38 | 8.9 | 11.9 | 0.025-0.05 | 0.02-0.064 | 0.02-0.087 | 負公差 |
| Ф40 | 9.9 | 12.6 | 0.025-0.05 | 0.02-0.064 | 0.02-0.087 | 負公差 |
| Ф45 | 12.5 | 14.1 | 0.025-0.05 | 0.02-0.064 | 0.02-0.087 | 負公差 |
| Ф50 | 15.4 | 15.7 | 0.025-0.05 | 0.02-0.064 | 0.02-0.087 | 負公差 |
| Ф55 | 18.7 | 17.3 | 0.03-0.06 | 0.03-0.076 | 0.03-0.104 | 負公差 |
| Ф56 | 19.3 | 17.6 | 0.03-0.06 | 0.03-0.076 | 0.03-0.104 | 負公差 |
| Ф60 | 22.2 | 18.8 | 0.03-0.06 | 0.03-0.076 | 0.03-0.104 | 負公差 |
| Ф63 | 24.5 | 19.8 | 0.03-0.06 | 0.03-0.076 | 0.03-0.104 | 負公差 |
| Ф65 | 26.1 | 20.4 | 0.03-0.06 | 0.03-0.076 | 0.03-0.104 | 負公差 |
| Ф70 | 30.2 | 22 | 0.03-0.06 | 0.03-0.076 | 0.03-0.104 | 負公差 |
| Ф75 | 34.7 | 23.6 | 0.03-0.06 | 0.03-0.076 | 0.03-0.104 | 負公差 |
| Ф80 | 39.5 | 25.1 | 0.03-0.06 | 0.03-0.076 | 0.03-0.104 | 負公差 |
| Ф85 | 44.6 | 26.7 | 0.036-0.071 | 0.036-0.09 | 0.036-0.123 | 負公差 |
| Ф90 | 50 | 28.3 | 0.036-0.071 | 0.036-0.09 | 0.036-0.123 | 負公差 |
| Ф95 | 55.7 | 29.8 | 0.036-0.071 | 0.036-0.09 | 0.036-0.123 | 負公差 |
| Ф100 | 61.7 | 31.4 | 0.036-0.071 | 0.036-0.09 | 0.036-0.123 | 負公差 |
| Ф105 | 68 | 33 | 0.036-0.071 | 0.036-0.09 | 0.036-0.123 | 負公差 |
| Ф110 | 74.7 | 34.5 | 0.036-0.071 | 0.036-0.09 | 0.036-0.123 | 負公差 |
| Ф115 | 81.6 | 36.1 | 0.036-0.071 | 0.036-0.09 | 0.036-0.123 | 負公差 |
| Ф120 | 88.8 | 37.7 | 0.036-0.071 | 0.036-0.09 | 0.036-0.123 | 負公差 |
| Ф125 | 96 | 39.3 | 0.043-0.083 | 0.043-0.106 | 0.043-0.143 | 負公差 |
| Ф130 | 104.3 | 40.8 | 0.043-0.083 | 0.043-0.106 | 0.043-0.143 | 負公差 |
| Ф140 | 120.9 | 44 | 0.043-0.083 | 0.043-0.106 | 0.043-0.143 | 負公差 |
| Ф150 | 138.8 | 47.1 | 0.043-0.083 | 0.043-0.106 | 0.043-0.143 | 負公差 |
| Ф160 | 157.9 | 50.2 | 0.043-0.083 | 0.043-0.106 | 0.043-0.143 | 負公差 |
| Ф170 | 178.3 | 53.4 | 0.043-0.083 | 0.043-0.106 | 0.043-0.143 | 負公差 |
| Ф180 | 199.9 | 56.5 | 0.043-0.083 | 0.043-0.106 | 0.043-0.143 | 負公差 |
| Ф190 | 222.7 | 59.7 | 0.05-0.096 | 0.05-0.122 | 0.05-0.165 | 負公差 |
| Ф200 | 246.8 | 62.8 | 0.05-0.096 | 0.05-0.122 | 0.05-0.165 | 負公差 |
| Ф210 | 272.1 | 66 | 0.05-0.096 | 0.05-0.122 | 0.05-0.165 | 負公差 |
| Ф220 | 298.6 | 69.1 | 0.05-0.096 | 0.05-0.122 | 0.05-0.165 | 負公差 |
| Ф230 | 326.4 | 72.2 | 0.05-0.096 | 0.05-0.122 | 0.05-0.165 | 負公差 |
| Ф240 | 355.4 | 75.4 | 0.05-0.096 | 0.05-0.122 | 0.05-0.165 | 負公差 |
| Ф250 | 385.6 | 78.5 | 0.05-0.096 | 0.05-0.122 | 0.05-0.165 | 負公差 |
CHAIRMAN: Zhang Huiqiang +86-137 0618 5800
TEL: +86-0510-85585788
FAX: +86-0510-85585798
WEB: www.cn-aps.com
E-MAIL: MX5800@126.com / sales@qunkejx.com
ADD: No.3, Dujuan West Road, Hudai Industrial Park, Binhu District, Wuxi City
Scan Follow wechat
